It is very difficult to find a field without a sprayer these days. For a farmer to get the best nozzle sprayers for his garden, then he or she must possess the skills of choosing the best spray tips. When it comes to the spraying of pesticide then this is very important. There exists a wide variety of spray tips that can be used for agricultural purposes. Flood, even-spray, solid cone, raindrop, hollow cones, and many others are the examples of the spray tips. The flat spray tip and even-spray tip are the best tips that can be used by the farmers who are responsible for their chemical applications. The is also some area where the hollow cones and the solid cones can be used.
To be able to achieve your desires regardless of the selection of the spray nozzle you can choose a basic nozzle and spray technique. It is advisable that to achieve a uniform distribution then you can overlap the outer edges of the spray pattern. To be able to achieve the desired pattern of the spraying then you can correct the spacing of the nozzles and also the boom height above the surface being sprayed. The amount of the overlap is also affected by the design. The manufactures range of recommendation is from thirty percent to a hundred percent. The overlap will automatically change from one design to the other. Recommendation from the manufactures will be necessary for choosing the right tips. Finding the best spray overlap and the spray height will depend on the information given.
Considering the droplets of two sprays can help you in the managing of the spray drift. When the bigger droplet has a twice bigger diameter than the smaller one. The big drop will fall faster than the small one because of the weight. The smaller droplets also have a very high probability of being carried by the wind than the larger droplets.
The name of the flat fan nozzle is from the shape of the pattern produced by the spray that it produces. “V” is the shape resembled by the spray pattern. Covering fully the area being sprayed was the reason why this spray was designed. The pattern of its spray is narrow and elliptical. When you are searching for a spray tip there are available factors to consider that are available. These factors include the material used to make the tip, the orifice size and the angle of the spray. Tips of the sprays will need to be replaced eventually as the will wear out with time. The abrasiveness and the corrosiveness of the solution being sprayed are the ones that will dictate the lifespan of the spray tip.
Leave a Reply